>@9
Multitone Audio Test System
User Manual
V 3.32
61 / 71
*CLS
Use
The CLear Status command clears status data structures, i.e. standard event status registers, so
that the corresponding summary ESB bit is clear. See also chapter IEEE Standard Status
Data Structure.
Example
:
→
*CLS
Explanation
*CLS has same effect as *ESR? query, except it is a command.
*ESE
Use
The standard Event Status Enable command sets the standard event status enable register bits.
The standard event status enable register allows one or more events in the standard event
status register to be reflected in the ESB summary-message bit. See also chapter IEEE
Standard Status Data Structure.
Parameter
<Enable_value> Byte
Range
0 to 255
Example
:
→
*ESE 32
(enables command error event)
*ESE?
Use
The standard Event Status Enable query allows the programmer to determine the current
contents of the standard event status enable register. See also chapter IEEE Standard Status
Data Structure.
Parameter
<Enable_value> Byte
Range
0 to 255
Example
:
→
→
:
*ESE?
32
*SRE
Use
The Service Request Enable command sets the service request enable register bits. The
service request enabling allows a programmer to select which summary messages in the status
Byte register may cause service request (SRQ). The programmer can select reasons to issue a
service request by altering the contents of the service request enable register. See also chapter
IEEE Standard Status Data Structure.
Parameter
<Enable_value> Byte
Range
0 to 255
Example
:
→
*SRE 32
(enables standard event status bit [ESB])
*SRE?
Use
The Service Request Enable query allows to determine the current contents of the service
