Page 11 of 14
NPPA-TT-SD50 Instruction Manual
For the perfect management of the system and for individual identification according to
customer’s needs there are two large and separate labeling strips, one for the bottom and one
for the top row.
To write on the paper you have to unscrew one of the outer fixing screws of the front panel.
Then pull out the side-stop, the transparent foil and the paper strip itself.
After marking is done assemble the parts in reversed sequence.
Remove labeling strip
For easy and perfect marking you can use our designation software “PatchLabel” which is
available on our web site
www.neutrik.com
free of charge.
Print-Out software “Patch Label”
Side Stop
