manualshive.com logo in svg

NEUTRIK NA2-IO-DPRO, User Manual

Share
Download
NEUTRIK NA2-IO-DPRO User Manual Download Page 4

4

User Manual – DANTE

TM

 Adapter NA2-IO-DPRO | BDA 573 V1 2019/08

About this Document

1  About this Document

This user manual provides an overview of the necessary operation steps and settings on the prod-
uct. 

1.1 Significance of the user manual

This user manual is an integral component of the product and part of the product's safety 
concept. 

 

T

Make sure that all persons who work with the product have fully read and also 
understood this user manual.

 

T

Observe all instructions exactly, especially the safety instructions.

This user manual contains important information on safely and properly operating the 
product.

 

T

Keep this user manual in the immediate vicinity of the product so personnel have access 
to it at all times.

 

T

Pass this user manual on to every user, e.g., by lending it, or to the future owner of the product.

 

T

If this user manual is lost or damaged, a copy of it can be downloaded from the Neutrik's 
website (www.neutrik.com).

1.2 Designations

Designation

Explanation

DPRO Adapter

DPRO Adapter NA2-IO-DPRO; to ensure the text is easy-to-read, the 
device is hereinafter referred to as DPRO Adapter.

Dante

TM

 audio 

networking

Dante

TM

 audio networking (hereinafter referred to as Dante

TM

) Dante

TM

 

stands for 

D

igital 

A

udio 

N

etwork 

T

hrough 

E

thernet and is an audio 

network protocol developed by the Australian company Audinate. Dante

TM

 

delivers uncompressed, multi-channel, low-latency digital audio over a 
standard Ethernet network using Layer 3 IP packets.

PoE

Power over Ethernet; the device is supplied with power via the network 
connection.

Peripheral devices

Any device that can be connected to the DPRO Adapter: audio sources 
(transmitters) and audio sinks (receivers)

Audio source

Any device that emit an audio signal

Audio sink

Any device that receives audio signals, such as loudspeakers, audio 
systems (amplifiers, mixing consoles, etc.)

Summary of Contents for NA2-IO-DPRO










































Reviews:

No comments

Brands by name

Popular brands

Load more brands