NEUTON MA 5.6
Striper Roller
-
Safety & Operating Instructions
3
Figure 5
Tool and Supplies Needed:
•
Bag of fine sand
•
Funnel
•
Hammer (optional)
1. Install one (1) of the two (2) End Caps (found in a plastic bag stapled around a Hook Arm) in one end of the Striper
Roller (
Figure 3
).
The End Cap fits snugly so you may have to gently tap it in with a Hammer.
2. Stand the Roller on the end with the End Cap installed and fill the Roller through the opposite hole in the Roller with
fine sand using a Funnel and then install the second End Cap.
3. Insert the Hooks into the Slots provided at the rear of the Mower (
Figure 2
on the previous page).
For ease of inserting the Hooks, hold the Roller Arms up against the Handlebars.
4. After inserting the Hooks, lower the Striper Roller to the ground (
Figure 4
), attach the Bagger or insert the Mulching
Plug, and simply create the lawn pattern of your choice as you mow!
See
Figure 5
for some examples of lawn patterns you can create with your new Striper Roller.
Figure 4
Hooks
in Slots
Figure 3
End Cap installed
TIP
TIP
TIP