NEUTON
Corded String Trimmer
-
Safety & Operating Instructions
5
Using the Trimmer
Proper Trimming Stance
Balance your weight on both feet on solid ground keeping your forward arm
with elbow locked in a "straight arm" position.
Basic Trimming Procedure
(
Figure 5
)
Slowly swing the Trimmer from side-to-side.
TIP:
Swing down the Wire Edge Guide to protect fence posts, foundations,
plants, and shrubbery.
Edging with your Trimmer
(
Figure 6
)
To convert the Trimmer for maintenance edging, first turn OFF the tool.
1. While holding the Lower Trimmer Tube with one hand, pull up on the Edger
Adjuster (
Figure 6
) with the other and rotate the Trimmer Head clockwise
(when viewed from the ON/OFF Switch end) until it stops (half turn) and
release the Edger Adjuster. The Trimmer Head is now locked in the Edger
position.
2. To operate as an Edger, position Trimmer above sidewalk as shown (
Figure 6
).
3. To return to the trimming position, turn the tool OFF, pull up on the Edger
Adjuster, and rotate the Trimmer head counterclockwise until it stops and
then release the Edger Adjuster.
Figure 6
Figure 5
Edger Adjuster
Wire
Edge
Guide
