Neural DSP Quad Cortex User Manual Download Page 8

Page: 8 / 118

Setting up your Quad Cortex

To turn the Quad Cortex on, connect the power cable to the input
on the back and wait for it to power up.

Tap the name of the mode currently active at the top-right of the
display or press the furthest-right footswitches on the bottom two
rows together.

Before connecting your instrument, make sure the volume wheel is
turned down.

Connect your instrument to

Input 1

Connect your studio monitors, PA, or FRFR cabinet to either

XLR

Outs 1/2

TRS Outs 3/4

Alternatively, if you want to use headphones, connect them to the
Headphones output.

Quick Start

Turning on your Quad Cortex

Changing Modes

Connecting your gear

While in Preset Mode, press footswitches A-H to switch Presets.

Press the Up/Down footswitches to navigate through the Preset
banks.

Press and hold the bottom-right footswitch to activate the

Tuner.

Browsing Presets

Tuner

If you’re not sure about the
correct input/output levels,
check the

I/O Settings

section.

Summary of Contents for Quad Cortex























































































































Search results

Summary of Contents for Quad Cortex

Reviews:

Neural DSP Quad Cortex, User Manual, Page: 8 / 118

Search results

Summary of Contents for Quad Cortex

Reviews: