CONTROLS
Setup Controls
These controls are accessed by holding down the Engage footswitch while turning
the knob.
Speaker Simulator
This control turns the internal speaker simulator on/off.
LED Color Knob Position Use
Off yellow-
green
full counter-
clockwise
external speaker simulator such as Iconoclast,
amplifier head & cabinet, or combo amp
On blue
full clockwise direct to a recording interface, mixer, powered
speaker, or headphone amp
Note — the Speaker Simulator is a global setting: it is independent of the preset selection.
The Speaker Simulator filter is voiced to sound similar to Iconoclast with default
settings and tone knobs at 12 o’clock. It is not adjustable.
Tilt EQ
The global Tilt EQ allows one-knob compensation for a variety of output
connections. Start with the EQ controls at 12 o’clock or their default setting. Then
use the Tilt EQ to dial in a neutral-sounding tone. Finally, create your presets.
When you change your output connection (for example, from an amp to direct),
the Tilt EQ may be used to adapt your tone to your new setup without needing to
change your presets.
Note — the Tilt EQ is a global setting: it is independent of the preset selection.
Summary of Contents for NEURON
Page 1: ...NEURON GAIN INTELLIGENCE...
Page 20: ...www neunaber net...
