Container Cleaning System TANKO®EX-R64T
3 Design and Function
Translation - Operating/installation instructions 2020/03
25/80
3.2
General Function Description
The TANKO-EX-R64T is a compact, axially rotating cleaning system.
It has no electrical equipment and is driven by the flowing cleaning medium and internal paddle wheels.
The axis, which forms the cleaning device carrier with the welded T-piece and the threaded nipples, is
double-mounted on balls.
The pressure and the flow of the cleaning medium cause the cleaning device carrier of the TANKO-EX-R64T
to rotate. This is done by paddle wheels in the actuator. Holes at the ends of the cleaning device carrier that
are inclined towards the center plane are used as an actuating support for the TANKO-EX-R64T.
2 TANKO-EX-S30 units or 2 TANKO-EX-RB-30 units are attached to the cleaning device carrier. They are
also driven by the cleaning medium flowing through the TANKO-R64T.
The TANKO-R64T is made of stainless steel. Several circulation radii of the TANKO-R64T are available
for different applications and container sizes.
Figure 3.2-1: Design of actuator
A
Media connection [MA]
K
Connections for cleaning devices
X
Identification of the device (see
Section
1 - 3 Actuator components
1 Housing
2 Axis
3 Balls
4 Holes for actuator support
Only plants (containers) with sufficient grounding and made of conductive material may be cleaned.
The container outlet must be open during a cleaning process, i.e. no accumulation of cleaning agent
may occur.
orbital welded
