NEULOG FLOW LOGGER SENSOR GUIDE
Technical background:
The philosophy behind NeuLog’s plug and play technology is based on each sensor’s
ability to store its own data due to an internal flash memory chip and micro-controller
in each plastic NeuLog body. This technology allows the sensor to collect and then
store the digital data in the correct scientific units (oC, oF, Lux, %, ppm, for example).
The sensor is pre-calibrated at the factory. The built-in software in the logger can be
upgraded for free at any time using the provided firmware update.
The flow sensor houses an internal water wheel; as liquid flows through the probe the
wheel rotates at the same velocity as the liquid's. The water wheel does not connect
directly to the walls of the sensor but instead, floats on a bearing to lower the friction of
the system allowing for the water wheel to take the velocity of the water passing
through it more accurately.
The water wheel shaft includes a magnet and the rotation is sensed by a Hall Effect
sensor, without any mechanical connection.
The flow is calculated by the internal controller that converts the rotation speed into
flow rate.
Maintenance and storage:
Never submerge the NeuLog sensor’s plastic body in any liquid.
Do not allow liquid into the flow sensor’s body.
After use, gently wipe away any foreign material from the flow sensor.
Store in a box at room temperature out of direct sunlight.
Warranty:
We promise to deliver our sensor free of defects in materials and workmanship. The
warranty is for a period of 3 years from the date of purchase and does not cover
damage of the product caused by improper use, abuse, or incorrect storage. Sensors
with a shelf life such as ion selective probes have a warranty of 1 year. Should you
need to act upon the warranty, please contact your distributor. Your sensor will be
repaired or replaced.
Thank you for using NeuLog!
Flexible, simple, fast, forward thinking.
W:
A: 850 St Paul Street, Suite 15, Rochester, NY 14605
P: 1.866.553.8536
V11042014