NEULOG DROP COUNTER LOGGER SENSOR GUIDE
Technical background:
The
philosophy behind NeuLog’s plug and play technology is based on each sensor’s
ability to store its own data due to an internal flash memory chip and micro-controller
in each plastic NeuLog body. This technology allows the sensor to collect and then
store the digital data in the correct scientific units (
o
C,
o
F, Lux, %, ppm, for example).
The sensor is pre-calibrated at the factory. The built-in software in the logger can be
upgraded for free at any time using the provided firmware update.
The NeuLog drop counter sensor uses an infrared beam which passes between the
two endpoints of the sensor probe to count drops. As liquid passes through the
infrared beam, infrared light is scattered and not noticed by the infrared detector on
the opposing side.
Regardless of the liquid's opacity or color, the infrared light bends away from the
detector. Each time there is a break in the infrared beam, a drop is counted.
Maintenance and storage:
Never submerge the NeuLog plastic body in any liquid.
Do
not allow liquid into the drop counter sensor’s body and probe.
After use, gently wipe away any foreign material from the drop counter sensor.
Store in a box at room temperature out of direct sunlight.
Warranty:
We promise to deliver our sensor free of defects in materials and workmanship. The
warranty is for a period of 3 years from the date of purchase and does not cover
damage of the product caused by improper use, abuse, or incorrect storage. Sensors
with a shelf life such as ion selective probes have a warranty of 1 year. Should you
need to act upon the warranty, please contact your distributor. Your sensor will be
repaired or replaced.
Thank you for using NeuLog!
Flexible, simple, fast, forward thinking.
W:
A: 850 St Paul Street, Suite 15, Rochester, NY 14605
P: 1.866.553.8536
V11042014