NEULOG PULSE SENSOR GUIDE
Restoring sensor’s factory default settings:
Procedure:
1.
Connect the USB-200 to a PC, Mac, tablet, or smart device.
2.
Connect the heart rate and pulse sensor to a USB-200 module (they
directly plug together). Please note no calibration is required for this
sensor.
3.
Open the NeuLog software.
4.
Click the “Tools” icon.
5.
Click the “Restore sensor’s factory defaults” on the menu.
6.
If prompted to clear the graph, click either the “Off-line experiment” or
“On-line experiment” button (whichever you are using).
7.
Click “Clear experiment results”.
8.
Resume from step 4.
Included with sensor:
NeuLog NUL-208 Heart Rate and Pulse Sensor Guide (this document).
Fingertip/earlobe clip with IR receiver transmitter.
Sensor specifications
Range and
operation modes
Beats per minute
0 to 240
Arbitrary analog
units (wave
function)
0-1023
Analog
values
ADC resolution
10 bit
Accuracy
1
Resolution
2 BPM
1
Max sample rate
(S/sec)
100
100
Sensor features:
Fully digital data.
Rugged plastic ergonomic case.
Push button switch for Start/Stop experiments in off line mode.
LED indicator of experiment status (blinks while collecting data).
Pre-calibrated sensing equipment.
Pulse sensing electrodes located in the probe clips which are attached
directly to the sensor’s plastic body.
Note:
NeuLog products are intended for educational use.
Videos and experiment examples:
Videos, literature and other probes can be found at
http://neulog.com/Heartrateamppulseloggersensor.php
Heart Rate and Coughing
-
http://neulog.com/portals/3/Users/Experiment_B-
18_Heart_Rate_and_Coughing_Ver_3.2.5.pdf
Heart Rate and Physical Activity
-
http://neulog.com/portals/3/Users/Experiment_B-
19_Heart_Rate_and_Physical_activity_Ver_3.2.8.pdf