Neue IH601FL User Manual Download Page 8

Lock

You can lock the control panel while cooking zones

operate. It prevents an accidental change of the heat

setting.
Set the heat setting first.

To activate the function: touch 

 comes on for 4

seconds. The Timer stays on.

To deactivate the function: touch 

. The previous

heat setting comes on.

When you deactivate the hob, you also

deactivate this function.

The Child Safety Device

This function prevents an accidental operation of the

hob.

To activate the function: activate the hob with 

. Do

not set the heat setting. Touch 

 for 4 seconds. 

comes on. Deactivate the hob with 

.

To deactivate the function: activate the hob with 

.

Do not set the heat setting. Touch 

 for 4 seconds.

 comes on. Deactivate the hob with 

.

To override the function for only one cooking time:
activate the hob with 

 comes on. Touch 

 for 4

seconds. Set the heat setting in 10 seconds. You can
operate the hob. When you deactivate the hob with 

the function operates again.

Power management function

• Cooking zones are grouped according to the

location and number of the phases in the hob. See

the illustration.

• Each phase has a maximum electricity loading of

3700 W.

• The function divides the power between cooking

zones connected to the same phase.

• The function activates when the total electricity

loading of the cooking zones connected to a single

phase exceeds 3700 W.

• The function decreases the power to the other

cooking zones connected to the same phase.

• The heat setting display of the reduced zones

changes between two levels.

Hints and tips

Warning! Refer to Safety chapters.

Cookware

For induction cooking zones a strong

electro-magnetic field creates the heat in

the cookware very quickly.

Use the induction cooking zones with

correct cookware.

Cookware material

• correct: cast iron, steel, enamelled steel, stainless

steel, the bottom made of multi-layer (with correct

mark from a manufacturer).

• not correct: aluminium, copper, brass, glass,

ceramic, porcelain.

Cookware is correct for an induction hob if:
• some water boils very quickly on a zone set to the

highest heat setting.

• a magnet pulls on to the bottom of the cookware.

The bottom of the cookware must be as

thick and flat as possible.

8

Summary of Contents for IH601FL





















Reviews: