Neue IDSH451W, User Manual

Page: 6 / 16

Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Level
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the water softener
1. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode, re-
fer to “Setting and starting a programme”.
2. Press and hold the programme button until the indi-
cator starts to flash and the indica-
tor comes on.
3. Wait until the indicator
goes off and the
end indicator starts to flash (the indicator
continues to flash).
4. Press the programme button.
• The end indicator flashes intermittently. The
number of flashes shows the current level of the
water softener, e.g. 5 f pause + 5 flash-
es = level 5.
5. To adjust the level of the water softener, press the
programme button. Each time you press the pro-
gramme button you go to the next level.
6. Press the on/off button to deactivate the appliance
and to confirm the setting.
Filling the salt container
Caution! Water and salt can come out from the
salt container when you fill it. Risk of corrosion. To
prevent it, after you fill the salt container, start a
programme.
1 2
3
Put 1 litre of water in the
salt container (only for
the first time).
4
5 6
6