Some functional problems might occur for some types of
models when operating outside of that range. The cor-
rect operation can only be guaranteed within the speci-
fied temperature range. If you have any doubts regard-
ing where to install the appliance, please turn to the
vendor, to our customer service or to the nearest Serv-
ice Centre
Electrical Connection
Caution!
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Warning!
This appliance must be earthed.
The manufacturer declines any liability should
these safety measures not be observed.
1
2
3
4
5
Important!
The wires in the mains lead are coloured in
accordance with the following code:
1
Green and Yellow:
Earth
3
Brown:
Live
5
Blue:
Neutral
As the colours of the wires in the mains lead of this ap-
pliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as fol-
lows:
1.
Connect the wire coloured green and yellow to the
terminal marked either with the letter “E“ or by the
earth symbol or coloured green and yellow.
2.
Connect the wire coloured blue to the terminal ei-
ther marked with the letter “N“ or coloured black.
3.
Connect the wire coloured brown to the terminal ei-
ther marked with the “L“ or coloured red.
4.
Check that no cut, or stray strands of wire is
present and the cord clamp
4
is secure over the
outer sheath.
5.
Make sure the electricity supply voltage is the
same as that indicated on the appliance rating
plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp plug fitted
2
.
In the event of having to change the fuse in the plug
supplied, a 13 amp ASTA approved (BS 1362) fuse
must be used.
Warning!
A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard. Ensure
that it is disposed of safely.
9
