Neuation iFUGE L400P, Product User Manual

Page: 7 / 16

potential hazardous material within the clearance area/envelope.
• Equipment if used in any manner not specified in this manual or by the
manufacturer can result in the lapse of the product warranty.
• Repairs must only be performed by authorized service technician.
• Do not lean on the equipment. lt may damage the equipment or even harm the
operator.
• In the event of contamination caused by aggressive agents, the rotor must be
cleaned immediately using a natural cleaning liquid. This is particularly
important for the bares of the tubes. lf any damage is seen, contact the service
technician.
• Before using cleaning or decontamination methods other than those
mentioned by the manufacturer, contact the manufacturer to ensure that the
intended method will not damage the centrifuge.
• For safety we have provided protective earthing with power supply. Make sure
power supply is earthened.
7. INSTALLATION
The Laboratory centrifuge is supplied in packaging box. Open the box, remove the
packaging and gently place the centrifuge out of the box. Before 1st time usage,
open the centrifuge & ensure to remove all packaging from the rotor chamber.
Please keep all packaging in safe storage for at least 2 years for warranty purpose.
LOCATION & MOUNTING
Place the centrifuge on a flat, solid and leveled surface and ensure that all the four
feet of this centrifuge stand on the surface firmly. Avoid installing on slippery or
surface prone to vibration.
•
Ideal ambient temperature is 25
°
C ± S
°
C, avoid placing the centrifuge in
direct sunlight.
•
Keep clearance of at least 30 cm from all side for ease of usage.
•
Keep away from heat or water to avoid sample temperature issues or
centrifuge failures.
•
Do not place the centrifuge such that it becomes difficult to operate the
device.
II