3
2 QUICK INSTALLATION GUIDE
2.1 How to install your Waterplace into its housing
1.Remove the top plate.
2. Connect 24V adapter to the power (The connector is located on the back side of the Waterplace).
3. Install the device into its housing.
4. Reinstall the top plate of the Waterplace, the installation is completed.
5. Refer to section 2.2.2 for direct plumbing instructions.
2.2 How to fill the Waterplace
2.2.1 Filling with automatic pump
1.When the water tank is empty, you will see the lights blinking and you will hear small beeps.
2. Connect the fill tube to the water connector and
press the “B1” button
for 5 seconds.
3. The filling will start automatically.
4. When the tank is full the pump will stop automatically.
5.You can start your device.
2.2.2 Connecting to the Water Supply
1. Connect a suitable reducer to the water network. (Reducer = water network tube dimensions to
1/4")
2. Connect the 1/4" PEX pipe to the Waterplace. Two possible connections: Bottom opening or side
opening
2.3 How to pair the remote control
1.Press On/Off button on the unit for 5 seconds. The On/Off button will start to blink.
2.Press any button on the remote control, you will hear a beep confirmation.
3.The remote control is paired to the unit.
