Networking Dynamics Corporation CompuFax Page 2 User Manual Download | Manualshive

Page: 2 / 133

background image

January 2001

Copyright Notice

© Cop  1992--2001, an unpublished work by Networking Dynamics Corporation.
Portions Cop  1988--1996 by Aladdin Enterprises, Menlo Park, California.
Portions Cop  1990--1991 by Bitstream Inc.
Certain fonts are licensed from Elfring Consulting, Inc., 4N899 West Mary Drive, St. Charles, IL 60175.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, recording, or otherwise, without the prior written permission of Networking
Dynamics Corporation.
The information in this manual is furnished for informational use only, is subject to change without notice,
and should not be construed as a commitment by Networking Dynamics Corporation. Networking Dynamics
Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this
manual. The software described in this manual is furnished under license and may only be used or copied in
accordance with the terms of such license.

CompuFax is a registered trademark of Networking Dynamics Corporation.

DCL, VAX, VMS, OpenVMS and Alpha-AXP are registered trademarks of Compaq Computer Corporation.
Hewlett Packard, HP, Laserjet, PCL are registered trademarks of Hewlett Packard Corporation. MultiTech,
ZDX are registered trademarks of MultiTech Systems, Inc. PostScript is a registered trademark of Adobe
Systems, Inc.

Restricted Rights Legend

Use, duplication or disclosure by the US Government is subject to restrictions as set forth in subparagraph
(c)(1)(ii) of the Rights in Technical Data and Computer Software clause at 55.227-7013. For Civilian Agencies
the restrictions are set forth in subparagraph (a) through (d) of the Commercial Computer Software Restricted
Rights clause at 52.227-19 and the limitation set forth in Networking Dynamics Corporation's standard license
agreement for this software.

Unpublished rights reserved under the copyright laws of the United States of America.

«
1
2
3
4
...
»

Summary of Contents for CompuFax






































































































































Reviews:

No comments

Related manuals for CompuFax

Mobile Anti-Virus 60 Series

Brand: F-SECURE Pages: 90

AUTOCAR CIVIL 2010

Brand: Autodesk Pages: 6

ExtremeWare 7.0.0

Brand: Extreme Networks Pages: 1598

DISK DIRECTOR SUITE 10

Brand: ACRONIS Pages: 127

DRAGON NATURALLYSPEAKING PROFESSIONAL 5

Brand: Dragon Systems Pages: 222

Brand: ARTEX Pages: 33

Brand: ADS Technologies Pages: 2

Brand: Mad Catz Pages: 16

256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010

Brand: Autodesk Pages: 1638

Brand: Autodesk Pages: 6

23802-091408-9020 - PSG Dwf Composer 2

Brand: Autodesk Pages: 12

Brand: pagertec Pages: 16

DREAMWEAVER MX 2004-EXTENDING DREAMWEAVER

Brand: MACROMEDIA Pages: 296

VIAVOICE 10-ADVANCED EDITION

Brand: IBM Pages: 126

C6 Easy Imaging

Brand: Clickfree Pages: 24

Brand: M-Audio Pages: 23

Brand: ZENEC Pages: 3

Brand: Juniper Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands