RACK MOUNT INSTRUCTIONS
Rack Mounting
Attach the supplied mounting
brackets to the Hub chassis
using the supplied screws.
Note that the brackets allow
installation with the front or rear
facing out.
Care should be taken when
installing in a rack environment,
specifically:
Elevated Operating Ambient
- If the
NV-ER1808i is installed in a closed or
multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the
equipment in an environment compatible with the maximum ambient temperature does not exceed 50°C (122°F).
Reduced Air Flow
- Installation of the NV-ER1808i in a rack should be such that the amount of air flow required for
safe operation of the equipment is not compromised.
Mechanical Loading
- Mounting of the equipment in the rack should be such that a hazardous condition is not
achieved due to uneven mechanical loading.
Mains Circuit Overloading
- Consideration should be given to the connection of the equipment to the supply
circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
Reliable Earthing
- Reliable earthing of rack-mounted equipment should be maintained. Particular attention
should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
Wall Mounting
For wall-mount installations, attach the supplied mounting brackets to opposite corners of the Hub chassis using
the supplied screws.
Attach the brackets to the wall using wood screws (not supplied).
Table Mounting
For table-mount
installations, attach
the four rubber feet
(supplied) to the
bottom of the
chassis.
OUTPUTS: 56VDC 1AMP MAX. PER PORT
(no anal
og
/ no ether
net)
USE ON
LY
WITH A 250V FUSE
Auxiliary
Join
Link
10/100/1000
10/100/1000
Main
Power
Auxiliary
Join
Link
10/100/1000
10/100/1000
Main
Powe
r
Auxiliary
Join
Link
10/100/1000
10/100/1000
Main
Power
Page 4 of 25
Network Video Technologies
(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]