Network Technologies Xtendex USB-C5-200 Installation And Operation Manual Download Page 9

NTI XTENDEX USB EXTENDER 

 

6

 

TROUBLESHOOTING 

 

Each and every piece of every product produced by Network Technologies Inc is 100% tested to exacting specifications.   We 
make every effort to insure trouble-free installation and operation of our products. If problems are experienced while installing this 
product, please look over the troubleshooting chart below to see if perhaps we can answer any questions that arise.    If the 
answer is not found in the chart, a solution may be found in the knowledgebase on our website at 

http://information.networktechinc.com/jive/kbindex.jspa

  or please call us directly at (

800) 742-8324 (800-RGB-TECH)

 or 

(330) 562-7070 

 and we will be happy to assist in any way we can.   

 

Problem 

Cause 

Solution 

Remote or Local Unit 
green power LED does not 
illuminate 

 

Power supply is not connected or 
plugged-in (Remote Unit). 

 

CPU is not powered ON (Local 
Unit) 

 

 

 

Make sure outlet is live and AC adapter is plugged-in.   

 

Make sure USB cable is fully inserted on both ends.  

 

Make sure 5VDC jack is fully connected    

 

CPU doesn't detect the 
keyboard and the mouse 

 

Keyboard cable or mouse cable 
are loose  

 

CATx cable is too long 

 

 

Check cable connections 

 

 

CATx cable can be no more than 200 feet in length 

 

 

 

WARRANTY INFORMATION 

 

The warranty period on this product (parts and labor) is two (2) years from the date of purchase.  Please contact Network 
Technologies Inc at

 1-800-742-8324

  (1-800-RGB-TECH) or 

1-330-562-7070

 or visit our website at 

http://www.networktechinc.com

 for information regarding repairs and/or returns.  A return authorization number is required for 

all repairs/returns. 

 

 

 

 

 

                                                                                                                                                              MAN026    Rev. 8/27/14 

 

 

 

Summary of Contents for Xtendex USB-C5-200










Reviews: