NTI XTENDEX Low-Cost HDMI Over Gigabit IP Extender with IR and POE
7. Under “Advanced”, click “Port PVID Configuration”. Check the ports designated in step 6. In the textboxes at the top of the
table, enter the VLAN group ID to the “PVID” and the “VLAN member” fields. Click “Apply”.
8. Now you should see a page as shown in the picture below, with PVID and VLAN member fields updated for g5, g6 and g7.
9. Repeat steps 5-8 for other VLAN groups that you want to create. Now your VLAN groups should be configured correctly and
ready for use.
10