Alternative Power Supply
If the 12V power on the ENVIROMUX is
unavailable, connect the 12VDC AC adapter
(sold separately) as follows:
1. Connect the wire labeled “PLUS 12” to the
terminal marked “12VDC” on the smoke
detection sensor.
Note: DO NOT connect the 12VDC
adapter to the terminal labeled “24VDC”.
2. Connect the wire labeled “NEG” to the
terminal labeled “
—
“ (negative) on the smoke
detection sensor.
Alternative Sensor Connection
If a connection to an available “RJ45 Sensor”
input is desired, CAT5/5e/6 patch cable can
be used by cutting off one end and terminating
to the sensor as illustrated to the right.