AAV-DMUX
Rev. 1
8 Module status
The status of the module can be easily monitored visually by the LED’s at the front of
the module. The LED’s are visible through the front panel as shown in the figure
below.
Figure 5 LED overview
(Text not printed on the front panel).The AAV-DMUX has 4 LED’s. The colours of
each of the LED’s have different meanings as shown in the table below.
8.1 LED Overview
Diode \ state
Red LED
Orange LED
Green LED
No light
Card status
PTC fuse has been
triggered - remove
the module.
Module has not
been
programmed
Module power is
OK
Module has no
power
Video status
Video signal absent. SDI input in use* Optical input in use
Audio 1 status
Audio invalid
Audio is valid
Audio 2 status
Audio invalid
Audio is valid
*Some modules show green when either SDI or optical input is in use.
11
Card status
Video status
AES1 status
AAV-DMUX
AES2 status
