A0108DS
Rev.
5
2
Specifications
2.1
Video specifications
Frequency response:
20Hz-100kHz ± 0.1dB.
Crosstalk: >
-100dB.
THD+N: <
0.003%.
SNR:
> 90dB ref. To 0dB 20Hz-20kHz.
Number of inputs:
4 mono (2 stereo).
Input impedance:
> 10 kohms.
Max. input level:
+23 dBu.
Number of outputs:
4x8 mono (2x8 stereo).
Output impedance:
< 66 ohms.
Gain adjustment:
± 6dB.
Connector: DB25
female.
Unbalanced inputs:
4 mono.
Input impedance:
47 kohms.
AC Power:
External power supplies 100 - 260 VAC
DC Power:
±15V, connector DB9 male
Max power consumption: < 9W
Dimensions:
483 x 44 x 45 mm (19”, 1RU)
2.2
Rear view
Output 1/2 Unbalanced inputs Output 3/4
Power connector Gain adjust ½ Input 1 - 4 Gain adjust 3/4
2.3
Power connection
Do not connect mains to the desktop power supply before connecting
the power supply to the router.
Connect the DB9 female connector from the desktop power supply to the
main unit. Tighten the screws to assure a proper contact. To connect mains to
the desktop power supply you need a mains cord with IEC 320 connector.
A0108DS is normally delivered with the desktop power model
AC ±15V /
10W
. Upon customer request, A0108DS can also be delivered with
DC ±15V /
30W
, which may be fed by a 36 - 72 VDC mains power source. A Frame
mounted power supply solution is also available.
Please refer to the latest VikinX Product Catalogue for power supply types, or
call the Network Electronics ASA for this information.
A0108DS require ±15V DC with a minimum current of 300 mA. The following
pin-out is used on the DB9 male power connector:
5
