6
It is actually "
WWW.NETVOX.COM.CN
"
After it switches command-transmission mode successfully, the stream "021FFE0100E0" is returned.
The module strictly follows Profile Command to sent and receive control commands.
5-4. Control and Management
Users could use ZiG-BUTLER to manage your ZigBee network. From ZiG-BUTLER, you are able to send
ON or OFF command to the ZigBee network. Follow the instructions bellow for control and management.
5-5. Restore to Factory Setting
To restore it to factory setting, please follow the steps:
Step1. Power off ZL01E.
Step2. Press and hold the
Permit-join Key
.
Step3. Do not release the key and power on ZL01E to complete the restore.
6. Home Automation Clusters for ZL01E
A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A
simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table
lists the clusters which are supported by ZL01E.
1.End Point(s)
：
0x0A
2.Device ID
：
Combined Interface
（
0x0007
）
3.EndPoint Cluster ID
Server side
Client side
Mandatory
Basic(0x0000)
Identify(0x0003)
Commissioning(0x0015)
Diagnostics(0x0B05)
Optional
This lists the attributes of the basic information.