Setting up the Z801TXB and network
Here are the summarized steps
(1) Startup and network association
(2) Enroll Z801TXB to a security central (CIE).
(4) It is ready to be used.
To allow Z801TXB to function, it must first join to a ZigBee network. When it is given
powered it will automatically start searching for an existed network. So before you give
power to Z801TXB make sure it is within the wireless coverage distance (~70 meters or
less) and make sure
first
you have the
permit-join feature enabled
either on a
coordinator or a router device in the network so that Z801TXB will join to the network
through it then give power to Z801TXB and it will join into the network by itself.
*
On how to enable permit-join please refer to the router or coordinator device user manual
Network association operation:
Step 1: Make sure you have opened up permit-join function (valid for 60 seconds) of a
coordinator or a router.
Step 2: Give power to Z801TXB device (refer to
How to power up the device
)
The device will start to search for the network within reach.
Step 3: The network status indicator on the Z801TXB will
flash 5 times
when it finds the
network otherwise the indicator stays unchanged. If it failed to join, press binding key or
power cycle the device for another join attempt.
Notes:
a. By default the network does not allow any devices to join, it is done this way to prevent
any potential unauthorized device join attempt. Make sure Z801TXB must be within
the coverage area. You must enable permit join feature on a router or a coordinator
already in the network so that Z801TXB is permitted to join when the channel is
automatically searched.
b. On how to enable permit-join feature please refer to the coordinator or the router user
manual.
S
tep 1.
Startup and Network Association
