9
information such as IP address and IEEE address.
5.8. Battery
Low-power report: When the operating voltage is lower than 2.4V, Z501A will send a low-power report to the
CIE device. The 4 battery attributes:
BatteryVoltageMinThreshold: 2.1V
BatteryVoltageThreshold1: 2.2V
BatteryVoltageThreshold2: 2.3V
BatteryVoltageThreshold3: 2.4V
When the battery voltage is lower than the VoltageThreshold, it will send the voltage alarm code:
Lower than BatteryVoltageMinThreshold → sends the Alarmcode = 0x10
Lower than BatteryVoltageThreshold1 → sends the Alarmcode = 0x11
Lower than BatteryVoltageThreshold2 → sends the Alarmcode = 0x12
Lower than BatteryVoltageThreshold3 → sends the Alarmcode = 0x13
Users are able to use these data to check the battery status:
Power configuration cluster (ID:0x0001)
Battery voltage attribute (ID:0x0020)
5-9. Restore to Factory Setting
To restore it to factory setting, please follow the steps:
Step1. Power off Z501A.
Step2. Press and hold both
and
, and then power on Z501A.
Step3. After the indicator flashes
20 times
, reboot Z501A to complete the restore.
5-10. Rejoin to Network
When the router device is not working in the network, Z501A will immediately look for a new router to join
back to network. If Z501A fails to rejoin back to original network, it will enter sleeping mode for 15 minutes.
To manually add Z501A back to original network; activate Z501A and it will search the network to join
Again.
5-11. Report Configuration for Developer Only
10 seconds after powering on, Z501A will detect battery voltage, if the device report has been previously
configured, it will issue 1 or 2 reports within 1-60 seconds randomly on the device, and thereafter it will
report according to the configuration.
