4
5. Data Report
The device will immediately send a version report report and soil moisture, soil conductivity and report data of soil temperature and voltage values;
The device sends data in the default configuration before any configuration is done.
Maximum time: Max Interval
Note: The device send data cycle has been programmed to be correct. There is no minimum time supported.
R718PB15A defaults Max Interval = 60min.
The R718PB15A device does not support the ReportChange function. That is, the configuration is invalid. The sent report data string is always sent
according to the ReportMaxTime cycle.
Note: The real data sending cycle will be programmed before shipment.
R718PB15A Report data type: soil moisture, soil conductivity and soil temperature.
Data report configuration and sending period are as following:
Configure device parameters MaxTime = 1min
Downlink: 01580000003C0000000000
The device returns:
8158000000000000000000 (Configuration succeeded)
8158010000000000000000 (Configuration failed)
Read device configuration parameters
Down: 0258000000000000000000
The device returns:
82580000003C0000000000 (device current configuration parameters)
Description
Device
Cmd
ID
DeviceTy
pe
NetvoxPayLoadData
ConfigReportRe
q
R718PB15
AA
0x01
0x58
Reserved (2bytes Unit:s)
MaxTime(2bytes Unit:s)
Reserved
ConfigReportRs
p
0x81
Status(0x00_success)
Reserved (8Bytes,Fixed 0x00)
ReadConfigRepo
rtReq
0x02
Reserved (9Bytes,Fixed 0x00)
ReadConfigRepo
rtRsp
0x82
MinTime(2bytes Unit:s)
MaxTime(2bytes Unit:s)
Reserved
