background image

 

 

Note

Please do not disassemble the device unless it is required to replace the batteries.   

Do not touch the waterproof gasket, LED indicator light, function keys when replacing the batteries. 

Please use suitable screwdriver to tighten the screws (if using an electric screwdriver, it is 

recommended to set the torque as 4kgf) to ensure the device is impermeable. 

 

7.

 

Important Maintenance Instruction 

Kindly pay attention to the following in order to achieve the best maintenance of the product: 

   

  Keep the equipment dry. Rain, moisture and various liquids or water may contain minerals that 

can corrode electronic circuits. In case the device is wet, please dry it completely. 

  Do not use or store in dusty or dirty areas. This way can damage its detachable parts and   

electronic components. 

  Do not store in excessive heat place. High temperatures can shorten the life of electronic devices,   

destroy batteries, and deform or melt some plastic parts. 

  Do not store in excessive cold place. Otherwise, when the temperature rises to normal temperature, 

moisture will form inside which will destroy the board. 

  Do not throw, knock or shake the device. Treating equipment roughly can destroy internal circuit   

boards and delicate structures. 

  Do not wash with strong chemicals, detergents or strong detergents. 

  Do not paint the device. Smudges can make debris block detachable parts up and affect normal   

operation. 

  Do not throw the battery into the fire to prevent the battery from exploding. Damaged batteries   

may also explode. 

 

All the above suggestions apply equally to your device, batteries and accessories.   

If any device is not operating properly, please take it to the nearest authorized service facility for 

repairing. 

Summary of Contents for R718PA9









Reviews: