background image

 

 

4.Set Up Instruction 

Network Joining

 

 

Function Key

 

On/Off 

 

Power on 

DC12V adapter 

Turn on 

DC12V power supply, the green indicator flashing once means turn on 

successfully. 

Turn off   

(Restore to factory setting) 

Press and hold the function key for 5 seconds till the green indicator 

flashes 20 times. 

Power off 

Remove DC12V adapter. 

Note: 

1.

 

The first 5 seconds after power on, the device will be in engineering 

test mode. 

2.

 

On/off interval is suggested to be about 10 seconds to avoid the 

interference of capacitor inductance and other energy storage 

components. 

Never joined the network 

Turn on the device to search the network to join. 

The green indicator stays on for 5 seconds: success 

The green indicator remains off: fail 

Had joined the network 

(Not restore to the factory setting) 

Turn on the device to search the previous network to join. 

The green indicator stays on for 5 seconds: success 

The green indicator remains off: fail 

Fail to join the network   

Suggest to check the device verification information on the gateway   

or consult your platform server provider. 

Press and hold for 5 seconds 

Restore to factory setting / Turn off 

The green indicator flashes 20 times: success 

The green indicator remains off: fail 

Press once   

The device is in the network: the green indicator flashes once and sends 

a report 

The device is not in the network: the green indicator remains off 

Summary of Contents for R718PA1










Reviews: