5
4.Set up Instruction
On/Off
Power on
Insert 2 section AA 1.5V batteries
Turn on
Press the function key till the green and red indicator flashes once.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds till green indicator flashes for 20
times.
Power off
Remove Batteries.
Note
1.
Remove and insert the battery; the device is at off state by default.
2.
On/off interval is suggested to be about 10 seconds to avoid the interference
of capacitor inductance and other energy storage components.
3.
Hold the function key and insert batteries, the device will be into engineering
test mode.
Network Joining
Never joined the network
Turn on the device to search the network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
(not at factory setting)
Turn on the device to search the previous network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Function Key
Press and hold for 5
seconds
Restore to factory setting / Turn off
The green indicator flashes for 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: green indicator flashes once and sends a report
The device is not in the network: green indicator remains off
