8
6. Installation
(1) This product does not have a waterproof function. After the screening is completed, please place it indoors.
(2)
The door magnetic magnet part and the body part are installed on both sides of the door joint or the window joint, and the
distance between the two needs to be less than
2cm
; the dust in the installation position of the equipment needs to be wiped
clean and then affixed to the equipment.
(3)
The battery installation method is shown in the figure below (battery with "+" facing outward).
(4)
When installing the device, the magnet
must
move along the X axis relative to the sensor.
If the magnet moves along the Y axis relative to the sensor, it will cause repeated reports due to the magnetic field.
