4
3. Main Features
Compatible with LoRaWAN
2 section 3V CR2450 button battery powered
Report voltage status, vibration of duration
Compatible with LoRaWANTM Class A
Frequency hopping spread spectrum technology
Configuration parameters can be configured through third-party software platforms, data can be
read and alarms can be set via SMS text and email (optional)
Available third-party platform: Actility / ThingPark, TTN, MyDevices/Cayenne
Low power consumption and long battery life
4.Set up Instruction
4.1 Power on and Turn on / off
(1)
Power on.
Open the battery cover (users may need a flat blade screwdriver to open); insert two
sections of 3V CR2450 button batteries and close the battery cover.
(2)
Turn on.
If the device had never joined in any network or at factory setting mode, after powering
on, the device is at off mode by default setting. Press function key and release to turn on the device.
The green and red indicator will flash once to show that R311FC is turned on.
(3)
Turn off.
Press and hold function key for 5 seconds till the green indicator flashes quickly and
release. The green indicator will flash 20 times to show that R311FC is turned off.
(4)
Remove batteries (power off) when R311FC is on. Wait till 10 seconds after the capacitance
discharging. Insert batteries again, R311FC will be setted to be on mode by default. There is not
need to press function key to turn on the device. The red and green indicators will both flash and
then light off.
Note:
1. The interval between turning on/off or powering off/on is suggested to be about 10 seconds to
avoid the interference of capacitor inductance and other energy storage components.
2. Do not press function key and insert batteries in the same time, otherwise, it will enter engineer
testing mode.
4.2 Join Into Lora Network
To join R311FC into LoRa network to communicate with LoRa gateway.
The network operation is as following:
(1)
If R311FC had never joined any network or at factory setting mode, turn on the device; it will
search an available LoRa network to join. The green indicator will stay on for 5 seconds to show it
joins into the network, otherwise, the green indicator does not work.
