7
6. Installation
1. Tear off the 3M adhesive on the back of the motion detection
counter, and stick the body to the surface of the smooth object
(or motor) (please do not stick to the rough surface to prevent
the device from falling off after a long time)
Notes:
Wipe the surface of the object clean before installation to
avoid dust on the surface of the object and affect the paste
effect of the device.
Do not install the body in a metal shield box or in an
environment surrounded by other electrical equipment to
avoid affecting the wireless transmission of the equipment.
2. When the device detects the sudden movement or
vibration of the item (or the motor), the device status
changes; wait for a period of time (Deactive Time-default
5 seconds, can be modified) after entering the static state,
it is counted to be vibration once, the count is increased by
1. In the mean time, it will send the number of
simultaneous vibrations.
Notes:
(1) After the device vibrates and before it enters the
stationary state, if it continues to vibrate, it is postponed
for 5 seconds until the device enters the stationary state
before counting to 1.
(2) After the device is powered off, the count data is
cleared.
The motion detection counter (R311FB) is suitable for the
following scenarios:
Industrial equipment
Industrial instrument
Medical instruments
Where it is necessary to detect the number of motor runs
