(5)
8) Once scanner connected with wi�i and the software successfully , below notice will
be displayed in the software.
Restart:
Restart the software
Con�igure:
Open con�iguration interface.
9) Click “Keyboard entry” and” Open URL”.
10) Locate cursor on the place where you want scanner to output characters.
11) Setup keyboard language(please refer to the part of” keyboard language” in the
manual) then you can start to scan.
12) If you want to connect multi scanners to one computer, simply by scanning the qr
code in the software will make a new scanner connect to the same computer, then
repeat step 11 to con�igure keyboard language to the new scanner.
Note: NetumWiFiService demo software is a software based on Windows system,
which creates data receiving service through TCP/IP protocol, and contains two
additional functions.
①
Keyboard input:
Input received content to cursor position through keyboard.
②
Open URL:
call system default browser to open received URL.
