12
My-Netti.com
Model:
Netti Dynamic System
Language:
English
Version:
2021-03
SEAT ANGLE ADJUSTMENT:
Can be adjusted at any time by the use of the tilt
handles.
SEAT PLATE ADJUSTMENT:
The Netti Dynamic System seat plate is
pivoted in the front of the seat. This allows the
seat to rise in the rear when doing a hip extension.
The pelvic stabilizer which is fixed to the seat
plate, is necessary to make this happen. The pelvis
stabilizer must be used together with the dynamic
seat plate.
The pelvic stabilizer must be firmly
tightened to minimize the risk ofthe user
sliding forwards.
To prevent the seat plate to pivot too high, there
are seat plate limiters – belts – between the seat
plate and the chair frame. The seat plate limiters
can be adjusted to allow for max seat
pivoting. Adjustment of the seat
plate limiter is done by loosening
the screw holding the seat plate
limiter belt under the seat and
sliding it back or forward to find the
desired movement of the seat plate.
SEAT PLATE LOCK
In some cases it may be necessary for safety reasons
to lock the movement of the seat. This is when the
wheelchair is used as a seat in a car or when driving
the chair on rough surface where a sudden spastic
extension may cause the chair and user to become
unstable.
The seat plate lock is easy to use; remove the QR-
Axcle by pressing the head to release it and move
it from its upper position and push it into the lower
position.
Remember to unlock the seat plate when
you are back in smooth areas, allowing the
Netti Dynamic System to work.
