2018-08-MD0119UK
NORWAY: Alu Rehab AS | Bedriftsvegen 23 | N-4353 Klepp stasjon |
| Phone +47 51 78 62 20
DEN MARK: Alu Rehab ApS | Kløftehøj 8 | DK-8680 Ry |
| Phone +45 87887300
1.
With the chair you will get a pair of frame extenders
according to wheel size ordered.
First add the frame extenders to the chair.
Place the extenders from inside the chair frame
in the 2 upper holes for 22” and 24” wheels and
in the 2 lower for 12” and 16” wheels.
Frame and extenders should be mounted in a line.
Plug the steering tubes and the bolts coming with
the extender kit from outside to inside and fix the
extenders from inside with the bolts coming with the kit.
Add the wheel bushings to the extender on both sides
in the needed height position.
2.
Add the 4 steering tubes (Pos. 6) to the holes you
h
aven’t used for the extenders
and place the Universal
device basket (Pos. 1) in-between the frame.
Plug the bolts (Pos. 5) from outside into the steering
tubes and add the rectangular washers (Pos. 4) from
inside the device. Fix them with the self-locking nuts
(Pos. 5).
3.
Finally add the extra-long antitippers (Pos. 3) to the frame
and test if you can swing the antitippers upwards.
Warning:
The anti-tips must always be turned and locked downwards whenever the basket is
mounted to a wheelchair.
The wheelchair with Universal device rack is NOT approved for being used as a seat in a
car.
Important note:
A copy of these installation and operating instructions must be given to the user of the wheelchair and their carers.
Maximum load:
Please note that the entire load on the wheelchair including the user, any accessories, the universal device basket,
and other equipment, must not exceed the maximum load of the wheelchair written on the label of the wheelchair.
The Universal device basket has a maximum load of 6 kg / 13 lb!
