9
alu rehab aS_bedriftsveien 23_NO-4353 Klepp stasjon_Norway_Tel. +47 51 78 62 47 51 78 62 21_www.alurehab.com
Function
Model
Test/check
Done/oK
Arm support
all wheelchair models
Netti I,
Netti I comfort,
Netti II and
Netti III comfort
Netti 4u comfort|CeD
Netti Svipp and
Netti Svipp comfort
Check that the arm support
pads match and are adjusted
similarly. Check that the upper
adjustment locks correctly.
adjust the plastic screws in
the arm support bracket and
tighten the lock nut, the arm
support should slide easily
within the arm support. The
stop screw should be adjusted
to the same height on both
sides.
The slide mechanism should
operate easily. Check that the
arm support locks when swung
forward.
Check that the cloth protector
locates within the lock track
when swung forward.
Bearing housing
all models except
Netti 4u comfort|CeD
ensure the bearing housing is
adjusted in position vertical to
the horizontal ground.
Front castors
all wheelchair models
The front castors should lock
in the secure position, the
quick release should operate
freely on and off. Check there
is minimum free play in the
quick release lock. Check both
front castors are mounted in
the same hole position on the
front forks.
Main wheel
all wheelchair models
Check that the main wheels
lock securely and that the
quick release operates freely
on and off. Check there is
minimum free play in the
quick release lock. Check both
main wheels are mounted in
the same hole position in the
wheelframe bracket. There
should be no free play in the
push rims.
9
Function contr
ol
alu rehab aS_bedriftsveien 23_NO-4353 Klepp stasjon_Norway_Tel. +47 51 78 62 47 51 78 62 21_www.alurehab.com
