netta BG-40B, Manual

Page: 10 / 23

C. Place the unit face down on a soft, non-abrasive surface.
Remove the bracket from the back of the unit by removing the
screws (See Fig. 1).
D. Mark out the location, then mount the bracket(s) onto the wall
using the supplied screws. This bracket
MUST have the
hooks facing upward and be level.
Note: It is strongly recommended that the mounting bracket
(E) be screwed into the wall studs where possible. If the wall
studs cannot be used, ensure that the supplied plastic
anchors are used to affix the bracket to the wall and the
bracket is adequately secured.
E. With the wall-mounting bracket installed, have two people lift
the appliance up and insert the two hooks on the bracket into
the two slots on the back of the appliance.
F.
Check the appliance for stability ensuring that the bracket will
not pull free from the wall.
For
40”, 50”, 60”
models.
Fig. 1