Operating the Product
Guidance on feeding water and the disassembly & cleaning
of the water tank
1. Pull the water tank buckle to the
horizontal state.
2. Pull out the water tank to the position as shown in
the figure (push the water tank inside after feeding
water).
3. Unscrew the rotary knob 90°
anticlockwise to separate the
water tank from the water pump
module (including the water pipe).
4. Pull out the water tank slowly to clean it or feed it
water.
5. After feeding water or cleaning the water tank,
install the water pump module in the water tank.
Insert the front hook into the slot of the water
tank and then rotate the rotary knob 90°
clockwise and close it as shown in the figure.
6. Push the water tank inside slowly and put the
water tank buckle back into the vertical state.
