Troubleshooting
If the product does not operate or does not operate properly, first
consult the table below. If you cannot find your fault/solution in
the below table, the product may have failed. At this time, we
recommend contacting your supplier to arrange a
repair/replacement.
Problem
Possible Cause
Solution
After the power has
been switched on,
the machine does
not work.
The plug may not
be plugged in
properly
Check whether the
plug is properly
inserted into the
socket.
The machine
suddenly stops
during heating.
The temperature
exceeds the
threshold of the
thermal cut-off.
The system will
automatically cut off
the power supply. Cool
the machine before
use.
Cleaning, Maintenance and Storage
•
Remove dust from the heater with a soft cloth. Wipe the
exterior surfaces of the heater with a damp cloth. Dry the
product thoroughly before operating again.
•
The fan motor is lubricated by the factory and requires no
extra lubrication. No other user maintenance is required or
recommended.
•
Store the heater in a clean and dry place when not in use.