OPERATING THE PRODUCT
STARTING THE MACHINE
Switching on: Press the on/off switch of the rear handle and the on/off switch of
the front handle with both hands at the same time.
Switching off: Release any one of the switches. The blade brake makes the
blades stop immediately with 0.5 seconds. The small flash in the area of the
upper ventilation slots is normal and does not harm you or the machine.
CUTTING HEDGES
Before starting work, select branches with a diameter no bigger than 20mm and
cut them with a pruning shear. A trapezoidal cut corresponds to the natural
growth of plants and results in optimal hedge growing.
First, cut the sides from the bottom to the top. Cut the upper part giving it the
shape you prefer, in a straight horizontal form, roof-like or rounded.
The lever guide will help you to control the blade.
The safety blade has laterally rounded and staggered cutting teeth to reduce the
danger of injury. The additional shock protection avoids inconvenient kickback
when the blades come into contact with walls, fences etc.
If the blades are jammed or blocked by obstacles, switch off the motor
immediately, pull the plug from the socket and then remove the object jamming
the blades.
Caution! Metal obstacles like fences, etc. may damage the cutting blades.
Always make sure to keep the extension cord behind your back and to start
cutting the hedge at the point nearest to the supply socked.
Always plan your working direction before starting.
