CLEANING & STORAGE
Before carrying out any checks or maintenance operations, disconnect
the plug from the electric power supply.
Check your machine regularly before starting work.
Damaged cutting blades must be repaired or exchanged before working
with the machine.
After each cutting operation, clean the cutting blade with a soft brush
and cloth with lubricating fluid oil and spray a thin layer of fluid
protective oil on the blades,
Always keep the ventilation slots in the motor housing clean.
Never clean or spray the machine with water. Clean the motor housing
only with a moist cloth and never apply detergents or solvents. These
may ruin the plastic parts of the machine. Finally, dry the motor housing
carefully.
Store the machine with the supplied protection cover.
Only use the original accessories and spare parts.
OPERATING THE HEDGE TRIMMER
Hold the unit firmly with both hands. Keep your left hand on the
telescopic pole and your right hand on the rear handle.
The unit is used for cutting in either direction in a slow, sweeping
action from side to side. Stand so that you are stable and balanced on
both feet. Inspect and clear the area of any hidden objects.
To protect yourself from electrocution, do not operate within 50ft of
overhead electrical lines.
Never use a blade after hitting a hard object without first inspecting it
for damage. If damage is detected, do not use the device.
