NVF-200LS/Rver.S 4 Band VDSL CO/CPE Modem USER’S MANUAL Ver. B.1
8
General Rules
Before making any connections to the modem, please note the following rules:
•
Ethernet Port (RJ-45)
All network connections to the modem Ethernet port must be made using Category 5 UTP for 100Mbps,
Category 3, 4 UTP for 10Mbps.
No more than 100 meters of cabling may be use between the MUX or HUB and an end node.
•
VDSL Port (RJ-11)
All Home network connections to the RJ-11port must use 24~26 gauge phone wiring.
•
We do not recommend using 28 gauge or above phone line.
Connecting the Modem
The modem has one Ethernet port which support connection to Ethernet operation. The devices attached to these
ports must support auto-negotiation or 10Base-T OR 100Base-TX unless they will always operate at half duplex. Use
any of the Ethernet ports to connect to devices such as NIC, Switch, bridge or router.
The RJ-11 line port is used to connect to the RJ-11 modular socket (wall outlet) that is connected to the VDSL 4-Band
CPE modem side (Point to point solution).
The RJ-11 phone port of the modem can be connected to a telephone for making calls
.
