netsys NV-700L, User Manual

Page: 13 / 78

NV-700L VDSL2 Single Master Modem USER’S MANUAL Ver. A.2
12
2.5.1 Connect the NV-700L and the NV-720R to the Line
The objective for VDSL2 is to pass high speed data over a twisted pair cable. In the setup, connect NV-700L to NV-720R through
phone wire(24~26 AWG) or line simulator or any other hardware representation of a cable network, with or without noise
injection and crosstalk simulations.
2.5.2 Connect the NV-700L and the NV-720R to LAN Devices
In the setup, usually an Ethernet tester serves as a representation of the LAN side as well as a representation of the WAN side.
2.5.3 Run Demos and Tests
The Ethernet tester may send data downstream as well as upstream. It also receives the data in order to check the integrity of the
data transmission. Different data rates can be tested under different line conditions