NV-600LI/RI Managed Industrial Grade VDSL2 CO/CPE Router USER’S MANUAL Ver. A4
37
4.3.4 Device Mode
The network processor used in the reference system is able to act as either a switch or a router. Allow the user to change the mode
of operation, click on the “Device Mode” link in the left navigation bar. A screen is displayed as shown in
Figure 4.3.4
Figure 4.3.4 Device Mode
Notes:
1. The default setting is in Switch (Bridge) mode, it is not necessary to change the setting in most of the case. In situations, which
devices (e.g. PC, Server, VoIP) connected to CPE requires Router function. Hence, set the NV-600LI/RI on Router mode.
2. Switch (Bridge) mode can pass through any packet, include vlan packet.
