NV-202 VDSL2 Bridge with DIP Switch USER’S MANUAL Ver. A4
9
•
External Splitter
Our devices support both ISDN interfaces U(2w) and S/T(4w). When using an external splitter, make sure
that you are using one that is compatible with the interface you want to use.
2.4 Connecting the Bridge
The bridge has two Ethernet ports which support connection to Ethernet operation. The devices attached to these
ports must support auto-negotiation or 10Base-T or 100Base-TX unless they will always operate at half duplex. Use
any of the Ethernet ports to connect to devices such as Monitor system, Server, Switch, bridge or router.
Notes:
1. The RJ11 Line port is used to connect the telephone that is connected to VDSL2 CO and CPE bridge
(Point-to-point solution).
2. The Slave device (CPE) must be connected to the Master device (CO) through the telephone wire. The Slave
cannot be connected to another Slave, and the Master cannot be connected to another Master. Please confirm the
DIP switch status
before the link is established.
