NV-310M/S EOC Master and Slave USER’S MANUAL Ver. D2
31
1.Verify coaxial cable use RG59 75 ohm cable.
2. Verify TV signal source and TV if available.
3. Check TV signal need to over 50MHz that will be passed.
4. Add TV signal repeater before NH-310M if TV signal source is too weak.
5. Add attenuator before TV if TV signal is too strong.
Notes:
1.
Weakened by the output television signal is due to environmental factors. NH-310M/S support TV
signal pass through, but can not guarantee to be able to maintain an appropriate TV signal output to
TV, If the connection distance is too long lead to output of TV signal no signal or attenuation
2. Please note NH-310M/S TV signal input power is unlimited, user does not need to add the
attenuator before NH-310M/S to weaken the TV signal source.
3. If TV signal is too strong, leading to the advent of television ripple, please add an attenuator before
TV.
4. HPNA3.1 must use 75 ohm coaxial cable. If use 50 ohm impendence, the performance will be less
than half
.
8. Question: How much node(Mac Address) can be connected to behind of the NH-310S.
Answer:
Each of the NH-310S can only be connected to 16 nodes (Mac Address).
