Netstor NS388P-D2, User Manual

Page: 20 / 31

20
Go Top ↑
The Tera Term needs to be downloaded; here is the reference site:
https://tera-term.en.lo4d.com/
Step 1. Install and launch Tera Term program.
Step 2. To ensure proper communication between NS388P NVMe JBOF switch
controller and the VT100 Terminal emulation, please configure the
VT100 Terminal emulation settings to the values as below:
For “ Port ”, select COM3 .
(COM3 is the example; actual COM number will depend on the COM
port that is used on the host computer)
For “ Baud rate ”, select 115200 .
For “ Data ”, select 8 bit . For “ Parity ”, select none .
For “ Stop ”, select 1 bit . For “ Flow control ”, select none .
Click OK when the selection is finished.