NetSpective Web Filter
•
16Hi Hardware Installation Guide
Page 9
DϱdžϭϮŇĂƚŚĞĂĚƐĐƌĞǁƐ
*
;ƚǁŽĨƌŽŶƚĂŶĚƚǁŽƌĞĂƌͿ
A
A
A
A
B
B
^ŵĂůůĮdžĞĚ
ƌĂĐŬďƌĂĐŬĞƚƐ
>ŽŶŐďƌĂĐŬĞƚ
C
B
C
dǁŽDϰƚƌƵƐƐŚĞĂĚƐĐƌĞǁƐ
KŶĞDϰƚƌƵƐƐ
ŚĞĂĚƐĐƌĞǁ
B
^ŵĂůůĮdžĞĚ
ƌĂĐŬďƌĂĐŬĞƚƐ
^ŵĂůůĮdžĞĚ
ƌĂĐŬďƌĂĐŬĞƚƐǁŝƚŚ
ƚŚƌĞĂĚĞĚŚŽůĞƐ
A
A
7.
2‐Post Rack Installation
Unpack the appliance and locate the mounting hardware
Step 1
Locate the two long and six short rack brackets
that came in your ship kit.
A.
Securely attach the set of short brackets with
the threaded screw holes to the long bracket
in the front as shown. Use two M4 truss head
screws for each bracket.
B.
Loosely attach one set of the other short
brackets to the long fixed bracket as shown
using one M4 truss head screw on each
bracket. The three holes on the flap will face
toward the back for later attachment to the
2‐post rack.
C.
Loosely attach the remaining set of short
brackets to the long fixed bracket as shown
using one M4 truss head screw on each
bracket. The three holes on the flap will face
toward the front for later attachment to the
2‐post rack.
Step 2
Attach the assembled brackets to the
2‐post rack.
A.
Insert two M5 x 12 flat head screws through
the short brackets into the 2‐post rack (in the
front and back of the rack as shown) and
tighten. Make sure the brackets are aligned
and level in height, not only in the front and
back but also on the left and right sides.
B.
Tighten each of the single screws on the small
fixed brackets (located on either side of the
rack) to secure the brackets in the rack and
ensure appliance stability.
NOTE:
Once the assembled rails are attached
to the rack, securely tighten the single screws
on steps
B
and
C
.
NOTE:
The installation procedures below
for
Section 9, 2‐Post Rack
are for use with
the rails and hardware provided in your ship
kit. If different style rails are being used,
or if your rack requires different hardware,
refer to the instructions provided with your
rail’s or rack’s ship kit.
