Netscout OneTouch AT G2, User Manual

Page: 19 / 396

Chapter 1: Get Acquainted
Safety Information
3
Safety Information
Table 1 shows the international electrical symbols used on the
analyzer or in this manual.
W
Warning
X
To prevent possible fire, electric shock, or personal
injury:
 Remove the batteries if the Product is not used for
an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the Product.
 The battery door must be closed and locked before
you operate the Product.
 Repair the Product before use if the battery leaks.
 Replace the batteries when the low battery
indicator shows to prevent incorrect measurements.
 Turn off the Product and disconnect all cables
before you replace the battery.
 Be sure that the battery polarity is correct to
prevent battery leakage.
Table 1. Symbols
W
Warning or Caution: Risk of damage or destruction to equipment
or software. See explanations in the manuals.
X
Warning: Risk of fire, electric shock, or personal injury.
*
Warning: Class 1 laser when an SFP module is installed. Risk of eye
damage from hazardous radiation.
 This key turns on the OneTouch analyzer.
~
Do not put products containing circuit boards into the garbage.
Dispose of circuit boards in accordance with local regulations.